Practical articles, in-depth tutorials, and architectural insights on software engineering, AI, and systems.
Learn practical fault identification in SMD or PTH inductors and coils on the workbench using a digital multimeter's continuity scale.
Learn how to identify, extract, and flash SPI EEPROM chips using the CH341A USB programmer and NeoProgrammer software directly on your electronics bench.
Learn how to create a bootable MemTest86 USB drive on the workbench to diagnose physical failures and RAM instability.
Learn how to identify components drawing excessive power in idle mode using a plug-in wattmeter and lower your electricity bills.
Learn the practical step-by-step guide to testing optocouplers directly on the circuit board using a multimeter to isolate failures in power supplies.
Learn the complete technical procedure to track overheating points in voltage regulator circuits and prevent system crashes.
Practical bench guide to identify damaged semiconductors in switched-mode power supplies using the multimeter diode test mode.
Learn advanced AC coupling techniques and proper probe usage to isolate and measure high-frequency noise and output ripples.
Learn how to recover data from corrupted NVMe SSDs with damaged sectors on Linux using the ddrescue utility to maximize block extraction safely.
Learn the step-by-step guide to testing power MOSFET transistors using only a standard digital multimeter in diode mode.
Page 36 of 218 • 2177 articles