Practical articles, in-depth tutorials, and architectural insights on software engineering, AI, and systems.
Learn the practical technique for assessing high-frequency electrical noise in linear power supplies using an oscilloscope, attenuated probe, and AC coupling.
Learn how to configure your oscilloscope and use AC-coupled probes to measure residual oscillations and ensure voltage stability in linear power supplies.
Learn the practical step-by-step guide to test SMD and PTH ceramic capacitors directly on printed circuit boards using a capacitance meter.
Learn the mechanics of reverse bias and how to diagnose leakage or shorts in Zener diodes directly on the printed circuit board using a digital multimeter.
Practical guide to diagnose SPI communication failures on OLED screens on the workbench using an Arduino and an oscilloscope easily.
Learn how to use a plug-in power meter to audit power factor, standby consumption, and single-phase motor inrush currents easily.
Learn how to measure ripple, high-frequency noise, and transient response of linear bench power supplies using AC coupling and proper oscilloscope probe techniques.
Learn the practical bench step-by-step guide to identify damaged semiconductors and capacitors at the input of switching power supplies using continuity and resistance tests.
Learn the practical workbench method to diagnose isolation and switching failures in optocouplers inside switched-mode power supplies without desoldering.
Learn how to capture serial traffic, identify address conflicts, and detect incorrect pull-ups on the I2C bus using a logic analyzer.
Page 33 of 114 • 1138 articles