Practical articles, in-depth tutorials, and architectural insights on software engineering, AI, and systems.
Learn how to accurately size electrical loads for servers and homelabs on a UPS using precise power measurements and smart automation.
Learn the practical step-by-step procedure to diagnose motherboard VRM power circuit failures using a standard bench multimeter.
Learn the step-by-step technical guide to diagnose physical failures on dedicated PCI Express network cards by measuring voltages on the pins using a bench multimeter.
Learn the practical bench procedure to check frequency and amplitude of quartz crystals using a digital oscilloscope and attenuated probe.
Learn how to diagnose burnt components, shorted protection diodes, and open fuses on hard drive logic boards using a multimeter.
Practical bench guide to identify broken traces, CC pin shorts, and power supply failures in USB-C connectors using a digital multimeter.
Learn how to engineer a 12V UPS circuit using lithium-ion cells and a TP5150 regulator module to keep your network router online during power outages.
Learn how to identify logic and clock faults in surface-mounted integrated circuits using an oscilloscope and active probing techniques on the bench.
Learn practical fault identification in SMD or PTH inductors and coils on the workbench using a digital multimeter's continuity scale.
Learn how to identify, extract, and flash SPI EEPROM chips using the CH341A USB programmer and NeoProgrammer software directly on your electronics bench.
Page 30 of 114 • 1138 articles